Belts General Purpose Aluminum Oxide 3 x 21 50-grit
Belts General Purpose Aluminum Oxide 3 x 21 40-grit
Discs General Purpose Floor Sanding 7 x 7/8 100-grit
Discs General Purpose Floor Sanding 7 x 7/8 80-grit
Discs General Purpose Floor Sanding 7 x 7/8 60-grit
Discs General Purpose Floor Sanding 7 x 7/8 36-grit
Discs General Purpose Floor Sanding 7 x 7/8 24-grit
Discs General Purpose Floor Sanding 7 x 7/8 20-grit
Sheets General Purpose VASL Siliverline 8x20-1/8 100-grit
Sheets General Purpose VASL Siliverline 8x20-1/8 80-grit
Sheets General Purpose VASL Siliverline 8x20-1/8 60-grit
Sheets General Purpose VASL Siliverline 8x20-1/8 36-grit
Sheets General Purpose VASL Siliverline 8x20-1/8 24-grit
Sheets General Purpose VASL Siliverline 8x20-1/8 20-grit
For the tightest floor possible choose the 2” x 16 Ga Porta-Nail by PNI. Porta-Nails are designed specifically for nailing tongue and groove wood floors using the Porta-Nailer and or Portamatic flooring installation tools This fastener has been the standard for close to 50 years and is recommended for use when installing 1/ 2 “ to 1” Solid wood flooring on a subfloor that is built with joists. The patent Porta-Nail offers the following features: Wide head wedge shaped design with well defined barbs which prevent the nail from backing out. A cupped point which enables the nail to cut through the wood thus minimizing the potential for splitting. These design features provide for the greatest impact and holding power to ensure that your floor lasts a lifetime. One pack of 1000 Porta-Nails will nail approximately 200 square feet of tongue and groove flooring. For use in Porta Nailer Models 401, 402, 501,410, 421 and 470.
The 421 Portamatic Pneumatic Floor Nailer is the most innovative and versatile air flooring tool on the market today.. The tool comes ready to nail 3/4 In. flooring and accessory pads and shoes, sold separately, allow for quick changes to handle 9/16, 33/32 In., Bamboo and 18mm Flooring. One tap with the mallet and your nail is set, tight and in the right spot! This is the only tool in the industry that allows you to add an accessory shoe to convert for Face Nailing and also includes a sturdy carrying case to protect your investment. Our blind nailing shoe is designed to protect the top surface of your floor and our oil-less operating system ensures no oil drops or stains from oil. A quick access gate and clip system allows you to clear a jam. The nail’s wide head and grapple barb design provides superior holding power! The 421 requires only the lightest tap to actuate and set the nail. The nailer is perfectly balanced as the tool rest on both the sub floor and the wood floor
The easy to use 402 Porta Nailer is the finest most versatile flooring nailer on the market and comes ready to angle nail 5/8, 3/4 and 33/32 In. thick tongue and groove flooring. The nailer will also nail 3/8 -9/16 In. floors, metric configurations including bamboo and can be converted for face nailing by changing accessory shoes (sold separately). PNI’s “Preferred-Seating" System uses an exclusive ratcheting ram to ensure nails are properly seated and flooring strips are tightly driven together. The patented “anti-split” nail cuts through wood without splitting your floor and three lengths of nails will insure you have the right fastener for the job. The nail’s wide head and grapple barb design provides superior holding power. Porta-Nailers are world-renowned by professionals and do-it yourselfers alike and are designed to protect today’s Pre Finished Surfaces and positions easily on your wood floor to insure proper nail placement. Made with
Uses 2 in Porta- Nails
Industrial fully submersible electric utility pump designed to efficiently move water. Quiet and powerful, they are ideal for operating in confined areas, basements, on rooftops, and manholes
Comes with one 2 inch discharge hose
2400 PSI@ 2.4 GPM Direct Drive Steel Frame Pressure Washer, 196cc Honda GX200 OHV With Low Oil Shut Down
